![]() You should have your front USB working very quickly. Make sure you match each wire to the correct pin on the board, following the chart shown above. If the front USB cable in your computer case doesn't have a 10-pin plug on the end, it will have a separate single-pin connector on each wire, and they will be marked with their function. Note the missing pin (pin 9) the plug is keyed so it will only fit one way so you can't put it on backwards. The pin assignments are a standard, and the cable from the front panel USB connectors in your computer case may already have a plug on the end which will fit. This is the page from the manual (you can ) for your board: The pinout of each USB connector is the same, so it does not matter which one you use. There are two connectors on the motherboard marked F_USB1 and F_USB2 for the front panel USB ports. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |